SERVICE MODE ALL TV part 2

* Service Menu #1
Press and hold the {MENU} button on the remote and the {MENU} button on the TV at the same time, until the first Service Menu is displayed. * Service Menu #2
Repeat the above sequence: Press and hold the {MENU} button on the remote and the {MENU} button on the TV at the same time, until the second Service Menu is displayed.

# Turn on the TV on and select the input that you want to adjust.
# Turn the display off.
# In quick sequence on the remote press: {MUTE} {1 } {8 } {2 } {POWER} buttons.
# The TV will turn On with the Service Menu displayed. ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET
# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing {MUTE} twice then {POWER}.

* Turn the TV off.
* Press simultaneously the {MENU} {VOL -} {CH -} buttons for about 8-10 seconds.
* The TV will turn on with the Service Menu displayed.
* Press the {POWER} button to exit.

PE77 U / PX75 U / PX77 U / PZ700 U / PZ750 U PD60 U / PX6 U / PX60 U / PX600 U PD50 U / PX50 U / PX500 U
* Hold down the {VOL -} button ON THE PLASMA TV.
* Press the {RECALL} button 3 times on the remote.
* The Service Menu will be displayed.
* Use {1 } {2 } on remote to navigate main menu items.
* Use {3 } {4 } on remote to navigate sub-menu items.
* Use {VOL+} {VOL -} on remote to change item value.
* Write down all values before changing Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service mode and save.

# Press {0 } {6 } {2 } {5 } {9 } {7 } {INFO+} on the remote. or
# Press {0 } {6 } {2 } {5 } {9 } {7 } {STATUS} on the remote. or
# Press {0 } {6 } {2 } {5 } {9 } {7 } {MENU} on the remote.
# Turn the TV off to exit the Service Menu.

SERVICE MODE ALL TV part 1

# Turn the TV on.
# Press the {MUTE} button three times on the remote.
# Press the {MUTE} button again on the remote and hold.
# Then press the {MENU} button on the TV's front panel.
# Release both buttons
# There should be a letter "S" on the upper right of the screen.
# Press the {MENU} button on the TV's front panel again.
# You are now in Service Menu.
# Use the {CH+} or {CH-} buttons to select the item.
# Use the {VOL+} and {VOL -} buttons to adjust the value.
# Turn the set off to exit the Service Menu.


# Using the remote control: # Turn the TV off. #
Press {DISPLAY} {5 } {VOL+} {POWER ON} buttons.
or Press {DISPLAY} {5 } {POWER ON} buttons. #
The Service Menu will be displayed. # Use
numbers {1 } and {4 } to select the item to adjust.
# Use numbers {3 } and {6 } to adjust the value of
the data. # Press {MUTE} then {ENTER} to save
new settings. # The words "WRITE" in red will
show up in the upper right corner if saved. # Turn
the TV off to exit the service menu.

F59 SERIES
* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8 } {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or the {EXIT} button on the remote control. DCAM Mode:
* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.
* Remote Control Key
Functions When In DCAM Mode:
{INPUT} ............. Blue (13 x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM Read
{MENU} .............. Remove Color
{EXIT} .............. Cross Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2 } ................. Cursor UP
{5 } ................. Cursor DOWN
{6 } ................. Cursor RIGHT
{4 } ................. Cursor LEFT
{0 } ................. RED (7 x5 Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ...... Phase To Exit The DCAM Mode:
* Press and hold the {TV} button.
* Press the {0 } button.
* Press the {1 } button.
* Release the {TV} button.

-Press the {MENU} button and go to the User Menu screen, make sure that the indicator (arrow) is pointed and highlights the "Picture Control".
- The buttons on top of the remote are set to TV & VCR respectively.
- Set sleep timer to "0 " minutes and while it is displayed, simultaneously press the {VIDEO STATUS} & {DISPLAY} buttons.
- The main service menu will be displayed with choices #1 through #9.
- Press one of the corresponding number keys to enter that menu.
- Use the {CH+} {CH-} buttons to navigate within a menu.
- Use the {VOL+} {VOL-} buttons to change the values.
- Use the {MUTING} button to memorize the changed value.
- Use the {BACK} button to exit the service menu.

sharp troubleshooting

Description Fix Sharp 13 " 13 SB50 Sound Sound is garbled C1705 and C1702 Sharp 19 " 19 RV629 P OSD no On Screen Display (OSD) D1904 = 1 SS119 or ECG519 Sharp 25 " 25 A-M050 Squeal high pitched squeal when TV is On Spray paint yoke on neck of CRT Sharp 25 " 25 A-M050 Flicker Picture flickers when there is loud music or vibrations near the TV Resoldered Vertical IC pins Sharp 25 " 25 J105 Vertical Vertical Deflection Short C511 = 100 uF/63 V, Q501 & Q502 = 2 sc3299 Sharp 25 " 25 J105 Dark Video Dark picture, brightness control has no effect R435 = 82 k/.5 W Sharp 25 " 25 MC157 Vertical Vert shrunk at top and bottom C2508 = 47 uF/63 V, C2505 = 100 uF/63 V Sharp 25 " 25 NV68 Video Snowy video when first turned on IC701 and C711 Sharp 25 " 25 VTJ100 Dead Dead, Motorboat sound in speakers IC756 = 5 V regulator Sharp 27 " 27 AS100 Dead Dead D754 shorted, RY701 open coil Sharp 27 " 27 F-S50 Tuner tuner drifts, A/V inputs work Replace tuner Sharp 27 " 27 LS180 Dead Dead, blew Fuse D713 and fuse Sharp 27 " 27 RV79 No Video No raster, No audio, no vert R2504 = 1 Ohm/1 W Sharp 27 " 27 RV79 Dead Dead Q1501 Sharp 27 " CL27 S18 Dead Dead D717 ( near IC703) Sharp 27 " 32 LS400 Shutdown Goes into shutdown Resolder flyback pins Sharp 32 " 32 U- S50 Video No color C812 ( coupling cap) Sharp 36 " 35 LD956 B Video Video flickering with white and black lines. Worse when cold CF201 = 4.5 MHz trap = Filc0013 cczz .

MY SON! MASDUQI IVAN

Anakku, kaulah pelita hatiku. Jadilah kamu anak yang berbakti pada orang tua, berguna bagi bangsa, agama, masyarakat!

Regulator Mesin Tv china.

Dalam beberapa perbaikan mesin tv china, sering kami dibuat pusing dengan bagian regulator. Tr final pada bagian ini sering mengalami kerusakan. Baik pada tegangan rendah atau tinggi. Kalau mati saat voltase kurang masih mending hanya tr final aja yg mati. Tapi kalau kena voltase tinggi eg:240v. Wah, jadi banyak yg berabe. Mungkin pembuatan mesin ini yg asal2an, atau mungkin partsnya yg kacangan. Yaaah ! Maklum aja hrganya murah, so dari pengalaman gw, gw akan seminimal mungkin untk menghindari ganti mesin.